HP ProLiant BL685c G7 Server-Blade - Manual (Page 32)

Hardware options installation 32
IMPORTANT: The following configurations are not supported:
• Installation of both SAS and SATA hard drives in a single RAID volume
• Installation of SSD and rotating media hard drives in a single RAID volume
A Smart Array P410i controller with an embedded FBWC module supports either two hot-plug SAS or two
hot-plug SATA hard drives. Hard drive activity is indicated by the hard drive LEDs on the hard drives.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server
blade or the enclosure unless all hard drive and device bays are populated with either a
component or a blank.
To install the component:
1. Remove the hard drive blank.
2. Prepare the hard drive.