HP Integrity NonStop H-Series - Manual (Page 130)

NonStop AutoTMF Software Commands
HP NonStop AutoTMF Software User’s Guide—429952-013
6-58
HELP
requests the list of all NonStop AutoTMF software commands available.
autotmf-command [ DETAIL | EXAMPLES ]
is a NonStop AutoTMF software command. Help displays the syntax and
description of the command.
Multi-word commands are entered with hyphens.
For example, to obtain help on ADD AUTOTMFFILESET, type:
HELP add-autotmffileset;
If DETAIL is specified, a description of the command parameters is displayed in
addition to the syntax.
If EXAMPLES is specified, Help displays examples of the command.
If neither DETAIL nor EXAMPLES is specified, Help displays both as possible
subtopics.
MONITOR [monitor-command]
displays the syntax and description of commands that can be sent to the NonStop
AutoTMF software monitor process via the CI. If no monitor command is specified,
HELP displays a list of the commands as subtopics.
monitor-commands is one of: BACKUPCPU, LOG, SECURITY, STATUS or
SWITCH or TRACE.
AUTOTMF-DEFINES
requests the display of the list of DEFINEs for which HELP is available.
define-name [ USAGE ]
is the name of the DEFINE. HELP displays the syntax and a description of the
DEFINEs.
If USAGE is specified, Help displays information about the usage of the DEFINE,
otherwise Help displays USAGE as a possible subtopic.
GLOBALS
requests a display of the list of all the possible global parameters that can be set
for NonStop AutoTMF software using the
ALTER GLOBAL command.
TRACING
requests information on tracing options and the commands to use to initiate
tracing.
Note. If the Monitor process is not running, the output of the HELP command may be
incomplete for certain commands or topics.