HP StoreFabric Converged Network Adapters - Manual (Page 22)

Installing the management application 22
Command Details
PATH $PATH:$PEGASUS_HOME/bin
PEGASUS_ENABLE_CMPI_P
ROVIDER_MANAGER
True
PEGASUS_CIM_SCHEMA CIM222
PEGASUS_PLATFORM For Linux 32 bit system: LINUX_IX86_GNU
For Linux 64 bit systems: LINUX_X86_64_GNU
PEGASUS_HAS_SSL Optional
Set to true for HTTPS support.
PEGASUS_ENABLE_PROTOC
OL_WSMAN
Optional
Set to true for WSMAN protocol support.
OpenPegasus additional settings
The following command are additional OpenPegasus settings:
$PEGASUS_HOME needs to be set up in the shell environment.
$PEGASUS_HOME/bin needs to be appended to the $PATH environment.
The following command examples configure the settings:
export PEGASUS_PLATFORM="LINUX_X86_64_GNU"
export PEGASUS_CIM_SCHEMA="CIM222"
export PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER=true
export PEGASUS_ROOT="/share/pegasus-2.10-src"
export PEGASUS_HOME="/pegasus"
export PATH=$PATH:$PEGASUS_HOME/bin
For SSL support, add the following environment variable:
export PEGASUS_HAS_SSL=true
For WS-MAN Support, add the following environment variable:
export PEGASUS_ENABLE_PROTOCOL_WSMAN=true
CimXML and WSMAN use the same ports for HTTP and HTTPs, port 5989.
Add exports at the end of the .bash_profile. The file is located in the /root directory. If the environment
variables are not set on a Linux system, run the following command:
source /root/.bash_profile
Building and installing OpenPegasus
To build and install OpenPegasus:
1. Navigate to the $PEGASUS_ROOT directory, which is the location of the OpenPegasus source root
directory.
2. Run the following commands:
make clean
make
make repository
Whenever OpenPegasus is built from source, all configurations reset to default. To rebuild OpenPegasus,
reconfigure the installation. For more information, see "Configuring OpenPegasus on a server (on page
23 )."