HP Deskjet 1280 Printer series - Manual (Page 9)

ENWW 2-2
Connecting the printer
Your printer supports local printing and network printing. For local printing, you can connect
the printer using a USB cable or parallel cable. For network printing, you can connect via an
optional HP external print server.
For Windows
Use a USB cable to connect the printer to the computer if the computer has a USB port and is
running Windows 98, Windows Me, Windows 2000, or Windows XP.
If your computer does not meet these specifications, connect the printer to your computer
using a parallel cable.
In most cases, after you install the printer software and connect a printer to the computer,
you can install additional printers with USB cables without reinstalling the printing software.
Software-first installation (recommended)
1 Start Windows and make sure no other Windows applications are running.
2 Insert the Starter CD into the CD-ROM drive. The CD menu runs automatically. If the CD
menu does not run automatically, click Start, click Run, and in the command line box
type the letter of your computer’s CD-ROM drive followed by :\setup (for example,
type D:\setup).
3 Click Install Printer Driver from the CD menu.
4 Choose your language and click OK.
5 Follow the onscreen instructions.
6 Click Connected directly to this computer, and then click Next.
7 If you are using a USB cable, select USB Cable and click Next.
If you are using a parallel cable, select Parallel Cable. From the Ports drop-down list,
select the parallel port on which the printer is connected.
8 Click Next and follow the onscreen instructions.
9 Connect the USB cable or parallel cable to the computer and the printer when prompted.
The Found New Hardware wizard appears on the computer screen and the printer icon is
created in the Printers folder.
It is recommended that you install the software before you connect the printer to the computer.
If the setup program detects an existing parallel connection and prompts you, you can choose
to install the printer on the port that is detected. In addition, if you select the Express Install
check box, the setup program will install using default settings.
Connect only the cable you have selected in step 7.