HP XP P9500 Storage - Manual (Page 179)

Description Item
Search for a user by specifying a DN External User Group Mapping -
Search User's DN
Available characters: Alphanumeric characters (ASCII characters) and all symbols.
If you specify sAMAccountName in External User Group Mapping - User Name
Attribute, or if you select Enable in External User Group Mapping, this item must be
specified.
If you select Disable in External User Group Mapping, this item is disabled.
You can enter alphanumeric characters and all symbols. Note, however, that when
you enter symbols like the following, you need to use a backslash to escape for
each symbol:
+ ; , < = > \ / "
In some cases, you may need to use a backslash and an ASCII character to escape.
• \ -> \5c (hexadecimal)
•
/ -> \2f (hexadecimal)
•
"-> \22 (hexadecimal)
Displays asterisks (*) to mask the password of the user for searching. External User Group Mapping -
Password
Displays the number of seconds before connection to the LDAP server times out. External User Group Mapping -
Timeout
Displays the retry interval in seconds when the connection to the LDAP server fails. External User Group Mapping -
Retry Interval
Displays the retry times when the connection to the LDAP server fails. External User Group Mapping -
Number of Retries
Displays the Setup Server window. Setup Server
Kerberos Properties
Kerberos Properties 179