Setting e-mail notification for sims or snmp traps, Configuring e-mail notification, Configuring e-mail – HP XP P9500 Storage User Manual

Page 57: Prerequisites

Advertising
background image

3.

Enter the message in the window.

Alphanumeric characters and symbols can be used in the message. The maximum length of
the message is 2,048 characters.

4.

Click Apply.

Setting e-mail notification for SIMs or SNMP traps

You can specify notification by e-mail to key users when system failures occur. Failures reported
in the e-mail are the same as the SIMs displayed in the Alerts window or reported by SNMP traps.

You can configure e-mails for any SIMs caused by software licensing events or Thin Provisioning
threshold events.

With SNMP traps, e-mail notification eliminates the need for checking for failures with the
SNMP manager.

You can also send a test e-mail.

SIMs failures reported by e-mail typically require user action. These SIMs are caused either by
reaching the threshold levels configured by the user, or by a software license needing user attention.

The following SIMs are reported by e-mail:

Table 14 SIM reference codes reported by e-mail

Alert level

Description

Reference code

SIM 13

SIM 23

SIM 22

SERIOUS

License key

Expiration.

xx

F7

7F

SERIOUS

Exceeded the licensed capacity.

xx

F8

7F

SERIOUS

Software invalidated by the expiration of the
prerequisite software.

xx

F9

7F

MODERATE

Failure with
paired volumes

Exceeded the pool usage threshold.

xx

00

60

MODERATE

Snapshot Pool or
Fast Snap Pool

Pool blockade.

xx

2x

60

MODERATE

Thin Provisioning
Pool

Exceeded the pool usage warning threshold.

xx

0x

62

MODERATE

Exceeded the pool usage system threshold.

xx

1x

62

MODERATE

Pool became full.

xx

2x

62

MODERATE

Exceeded the pool usage depletion threshold.

xx

6x

62

Configuring e-mail notification

Prerequisites

You must have a Security Administrator account with an Initial Configuration role to perform
this task.

You must have a mail server that supports the Simple Mail Transfer Protocol (SMTP).

If a firewall is used, port 25 must be used.

To configure settings for e-mail notice:

1.

Click Settings

→Environmental Setting→E-mail Information. The E-mail Information window

opens.

2.

Click

to change to Modify mode.

Setting e-mail notification for SIMs or SNMP traps

57

Advertising
This manual is related to the following products: