HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 13)

Commands 13
• Release Notes (extract, not display)
Item Description
Syntax vcsu -a packageinfo -l <FILE>
Parameter:
FILE Full path to the Virtual Connect package on the local computer or supported remote server
Example
Display package information from a file named VCpackage:
vcsu -a packageinfo -l VCpackage
report
Display the current running firmware version on all modules in a specific target enclosure. Also display
the VC-Enet and VC-FC firmware versions provided in the specified VC package file, and whether or not
the module can be updated. In addition to displaying the module firmware version and status, the report
command also displays details about the VC package contents.
Because the package version details appear, the user must provide a VC package file as part of the input
at the command line.
Item Description
Syntax vcsu -a report -i <IP> -u <USER> -p <PWD> -l <FILE> [-b <BAY>]
Parameters:
IP IP address of the active OA in the enclosure*
USER Name of the OA user with privileges to access all enclosure interconnect bays. Minimum
length is 3 characters.
PWD Password of the OA user. Minimum length is 3 characters.
FILE Full path to the Virtual Connect package on the local computer or supported remote server
BAY Optional. The bay number of the target module. If not specified, the default is all supported
modules.
*In a multi-enclosure environment, this must be the IP address of the active OA in the primary enclosure.
Examples
Display all modules in an enclosure:
vcsu -a report -i 192.168.1.100 -u Administrator -p password -l
VCpackage
Display a single module in an enclosure:
vcsu -a report -i 192.168.1.100 -u Administrator -p password -1
VCpackage -b 2
resetvcm
Log into the specified interconnect bay and restart the Virtual Connect Manager service. This is the same
process as the menu option "Reset VC Manager" from the Virtual Connect user interface.