HP Intelligent Infrastructure Analyzer Software Licenses - Manual (Page 33)

Suggestion
Follow the steps mentioned in “Correcting conditions with SFPs and FC Cables” (page 31) .
Problem
3:
103:
203:
303:
Suggestion
Follow the steps mentioned in “Correcting conditions with SFPs and FC Cables” (page 31) . If HP
IIAS continues to raise diagnostics logs then the problem may be with the connected SFP. Replace
the connected SFP with another SFP in good condition. If HP IIAS does not raise any diagnostics
log for the SFPs under question, then the problem is addressed successfully.
Problem
IAS Client is not able to connect to IIAS Server. The probable reason
could be that IIAS Server may not be running or has got disconnected.
Please restart the IIAS Server and then start the IIAS Client again.
Suggestion
•
Add the environment variable <value of system directory> \wbem to the “PATH”
and restart the command prompt.
•
Verify if firebird environment variable is used. Also if the same value is appended to ”PATH”
variable. Its value should be <installed directory>\server\lib\Firebird
•
On XP, after installing IIAS, if you get the above specified error, then please restart your system
and try again.
Correcting conditions with SFPs and FC cables/connectors 33