HP Intelligent Infrastructure Analyzer Software Licenses - Manual (Page 21)

SAN Event Log
Events are generated based on the following scenarios:
•
Component added or removed.
•
Monitored switch is not reachable.
•
Credentials are invalid.
•
Protocol time out errors.
•
License applied, modified or expired.
•
Days pending for License expiry.
The event log is shown in a tabular format. The rows in the table display the events, with one event
per row in descending order. The columns in the table display the following event attributes:
•
ID – event ID (for example: E1).
•
Severity – severity level of the event.
•
Component
•
Time – time when the event was generated (all the events generated from a single DC cycle
will have the same time).
•
Description – event description.
Figure 9 SAN Event Logs
SAN Event Logs view lists the following:
•
In the Rows per page drop-down list, select the number of rows of event that must be displayed
on each page.
•
Click Select All to select all the check boxes in the current page, click Unselect All to unselect
all the check boxes.
Event Manager 21