HP ProLiant SL2500 Scalable System - Manual (Page 90)

CLI commands 90
DISABLE POLLPOWER
• Description
Disables background process that polls each server for power usage.
Enable SNMP
• Command:
ENABLE SNMP
• Description:
Turns on SNMP protocol and agent in HP APM.
Disable SNMP
• Command:
DISABLE SNMP
• Description:
Turns off the SNMP protocol stack and agent. HP APM no longer responds to SNMP. This state is the
default.
Show SNMP
• Command:
SHOW SNMP
• Description:
Displays all parameters related to SNMP including whether SNMP is enabled, read-only and read-write
community strings, SNMP trap destinations, and the contact, name, and location settings.
Set SNMP RO
• Command:
SET SNMP RO "<community_string>"
• Description:
Sets the SNMP read-only public string to the string specified as a parameter.
Set SNMP RW
• Command:
SET SNMP RW "<community_string>"
• Description:
Sets the read-write string.