HP ProLiant SL2500 Scalable System - Manual (Page 28)

Command Line Interface 28
Serial Number: ADFV0000083
Asset Tag : SCI Lab PDU
Part Number : QL192A
Firmware Rev : 1.0a
Switched Outlets:
1: enabled
2: enabled
3: enabled
4: enabled
5: enabled
6: enabled
Input Feeds:
1:
Amps Drawn : 0.840000
Infeed Status : On
Infeed Load Status : Normal
2:
Amps Drawn : 0.860000
Infeed Status : On
Infeed Load Status : Normal
3:
Amps Drawn : 0.800000
Infeed Status : On
Infeed Load Status : Normal
4:
Amps Drawn : 2.530000
Infeed Status : N/A
Infeed Load Status : Normal
This command produces the same results as the SHOW SERVERS and SHOW TOPOLOGY commands.
If you must number the chassis in your rack or data center, then HP APM can display the chassis numbering,
based on the HP Advanced Power Manager Distribution Module port connection. For more information, see
"Rack Chassis Numbering (on page 17 )."
To show all the chassis and other devices connected to the HP APM, enter SHOW RACK ALL.
Showing the servers
To show the servers, enter SHOW SERVERS. The server information appears.
This command produces the same results as the SHOW RACK and SHOW TOPOLOGY commands.
Showing topology
To show the topology of everything that connects to the HP APM, enter SHOW TOPOLOGY. The topology
appears.
This command produces the same results as the SHOW RACK and SHOW SERVERS commands.
If you must number the chassis in your rack or data center, then HP APM can display the chassis numbering,
based on the HP APM Distribution Module port connection. For more information, see "Rack Chassis
Numbering (on page 17 )."
To show all the chassis and other devices connected to the HP APM, enter SHOW TOPOLOGY ALL.