HP ProLiant SL2500 Scalable System - Manual (Page 66)

Using SNMP 66
• cpqRackPowerSupplyOK
• cpqRackPowerSupplyRemoved
• cpqRackPowerSupplyInserted
• cpqRackServerBladeRemoved
• cpqRackServerBladeInserted
* Not supported on HP ProLiant s6500 Chassis
SNMP support of cpqHoSwRunningTable
The first element of this SNMP table lists the HP APM base firmware itself under cpqHoSwRunningName and
cpqHoSwRunningDesc with cpqHoSwRunningVersion listing the correct version of the HP APM firmware.
The following components are listed in the cpqHoSwRunningTable:
• SNMP
• SSH
• syslogd
• Telnet
The table entry cpqHoSWRunningState is set to either Running (2) or Stopped (3) to reflect whether that
service is enabled or not. The SNMP service is listed as "Running" when accessed through this MIB item.
All other items in this table are unsupported and will return their respective static return value for “unknown.”
The rows appear in this order:
• HP APM base firmware
• Telnet
• SSH
• SNMP
• syslogd
The following figure shows a sample table view of cpqHoSwRunningTable.