HP ProLiant SL2500 Scalable System - Manual (Page 75)

CLI commands 75
CLI commands
Clear faults
• Command:
CLEAR FAULTS
• Description:
Clears the fault log to have 0 entries.
Clear log
• Command:
CLEAR LOG
• Description:
Clears all previous event logs.
Clear screen
• Command:
CLEAR SCREEN
• Description:
Clears a VT100/ANSI compatible terminal of all characters. Places cursor at position 1,1.
Disable Ethernet
NOTE: This command can only be run from the serial console.
• Command:
DISABLE ETHERNET
• Description:
Disables network access, including SSH and Telnet access and remote syslog support.
Enable Ethernet
• Command:
ENABLE ETHERNET
• Description: