HP ProLiant SL2500 Scalable System - Manual (Page 87)

CLI commands 87
Show MAC address
• Command:
SHOW MACADDR
SHOW MACADDR <PORT#>
SHOW MACADDR <PORT#> <DMPORT#>
where:
<PORT#> refers to the HP APM port.
<DMPORT#> refers to the HP APM Distribution Module port.
• Description:
Shows the contents of the rack, including the MAC addresses of the individual SL server nodes, if
available.
Show time
• Command:
SHOW TIME
• Description:
Displays the currently set system time.
Show power baseline
• Command:
SHOW POWER BASELINE
• Description:
Reports the currently established baseline data for all chassis that are connected to the HP APM.
Show version
• Command:
SHOW VERSION
SHOW VERSION ALL
• Description:
o Displays HP APM firmware copyright, version, build date, and hardware version. Also displays HP
APM Distribution Module hardware and firmware versions.
o SHOW VERSION ALL shows the HP Power Management Controller Utility hardware and firmware
versions as well as the license status of all servers in the enclosures.
Upgrade image
• Command:
o If using TFTP protocol for upgrading HP APM, enter: