HP Integrity NonStop J-Series - Manual (Page 41)

Configuring the ELMM Server on the NonStop
System
Entry Level Media Manager Installation and User’s Guide— 694639-001
3- 17
Verifying the Host Port Number
Verifying the Host Port Number
Verifying the Host Port and EMS Messaging Numbers are
Listening
Once the ELMM server processes have started and the STATUS command has
determined that the appropriate files are running. Verify that the host port and the host
EMS messaging port numbers are listening for a GUI connection:
1. At the TACL prompt, type SCF.
2. Type STATUS PROCESS <TCP/IP PROCESS NAME>.
3. Type EXIT.
Figure 3-16. Verifying that Host Port Numbers and EMS Numbers are Listening
Listening
Messaging Number
Host Port and EMS