HP HD4000 Personal Media Drive - Manual (Page 9)

To insert the HP Personal Media Drive into a specially
designed HP PC:
1 Line up the ridges on the bottom of the drive with
the two slots on the correct side of the PC drive
bay. Do not force the drive into the bay; it should
slide easily into the bay.
2 Slide the drive all the way into the drive bay until
the drive is firmly connected to the internal power
and USB cables. When the PC is turned on, and
the drive is inserted correctly, the power LED on the
front of the drive is lit.
Drive Indicators and Connectors
The HP Personal Media Drive comes with two LED
indicators, a USB connector, a power connector, and
a security lock connector.
Front of HP Personal Media Drive
Back of HP Personal Media Drive
A Drive activity LED indicator
B Power on LED
C HP Personal Media Drive guide rails/feet
D USB 2.0 connector
(USB 1.1 backward compatible)
E DC power connector
F Kensington security locking slot
NOTE: The Kensington security lock is sold separately.
Connecting the Drive to a
PC without a Drive Bay
The HP Personal Media Drive is designed to work with
most PCs as an external hard disk drive that you
connect using a USB 2.0 cable.
To connect the drive:
1 Make sure you have installed the software and
drivers on the HP Personal Media Drive installation
CD. See “Installing Drivers and Software from the
Installation CD” on page 4.
2 Plug the round power cable from the power
adapter into the back of the HP Personal Media
Drive (H).
3 Plug power adapter into the power cable (J), and
then plug the power cable into the wall (K).
HP Personal Media Drive User’s Guide 5