Figure 2-2, Installing the slide members – HP NonStop G-Series User Manual
Page 19
Advertising
Setting Up the ACL Tape Drives
N1526A and N1527A ACL Tape Drive Installation and User’s Guide— 542756-003
2 -3
Setting Up the N1526A ACL Rackmount Unit
6. Attach the slide members using the supplied fasteners. Install the clip nuts on the
inside of the slide member’s front and back mounting bracket only if the vertical rail
mounting holes are not tapped.
Figure 2-2. Installing the Slide Members
Advertising
This manual is related to the following products: