HP Integrity NonStop H-Series - Manual (Page 183)

1. Click the /servlet_jsp/axis2 path under Applications in the NSJSP Web Application Manager
screen.
NOTE: If you do not have access to the NSJSP Web Application Manager screen, you can
run Axis2/Java on your NonStop system by completing the following steps:
a.
Go to the <iTP WebServer deployment directory>/conf directory using the
command:
OSS> cd <iTP WebServer deployment directory>/conf
For example:
OSS> cd /home/sash_usr/webserver/conf
b. Start your iTP WebServer using the command:
OSS> ./start
c. Access the Axis2/Java application using the address:
http://<IP Address of the iTP WebServer>:<port#>/servlet_jsp/axis2
The Axis2/Java Home Page appears.
Figure 7-3 shows the Axis2/Java Home Page.
Figure 7-3 Axis2/Java Home Page
2. Click Validate to verify if Axis2/Java has been successfully deployed on your NonStop
system. The Axis2/Java deployment is successful if:
•
No error or warning is reported.
• The core axis2 libraries are present message is displayed in the Essential
Components section.
• Found Axis2 default Version service and Axis2 is working properly
message is displayed in the Examining Version Service section.
Figure 7-4 shows the Axis2/Java Validate screen.
Installing Axis2/Java on NonStop 183