HP ProLiant BL680c G5 Server-Blade - Manual (Page 19)

Setup 19
Installation is shown in the HP BladeSystem c7000 Enclosure.
Server blade signal Interconnect bay Interconnect bay labels
NIC 1 (Embedded) 1
NIC 2 (Embedded) 2
NIC 3 (Embedded) 1
NIC 4 (Embedded) 2
Mezzanine 1 3 and 4
Mezzanine 2 5 and 6
7 and 8
Mezzanine 3 7 and 8
5 and 6
For detailed port mapping information, see the HP BladeSystem enclosure quick setup guide or the
HP BladeSystem enclosure setup and installation guide on the HP website
( http://www.hp.com/go/bladesystem/documentation ).
Installing a server blade
HP BladeSystem enclosures ship with device bay shelves to support half-height devices. To install a full-
height device, remove the device bay shelf and the corresponding blanks.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server blade
or the enclosure unless all hard drive and device bays are populated with either a component
or a blank.
Installation is shown in the HP BladeSystem c7000 Enclosure.
For detailed information on the c7000 or other BladeSystem enclosures, see the appropriate enclosure
setup guide or server blade user guide.