HP ProBook 440 G2 Notebook PC - Manual (Page 71)

5. Remove the service doors (see Removing the service doors on page 59 ).
6. Loosen the 4 hard drive screws (1).
7. Slide the hard drive (2) away from the center of the computer to disengage it from the connector.
8. Pull the plastic tab (3) to remove the hard drive from the bay.
Installing a hard drive
NOTE: Your computer may look slightly different from the illustration in this section.
To install the hard drive:
1. Insert the hard drive into the hard drive bay (1).
2. Slide the hard drive (2) toward the center of the computer to engage it with the connector.
Using hard drives 61