HP SAN Virtualization Services Platform - Manual (Page 43)

ListSnapcloneTasks command
Syntax
ListSnapcloneTasks -Group GroupName
Description
Lists snapclone tasks per group.
ManageSnapcloneGroup
command
Syntax
ManageSnapcloneGroup -Group GroupName 1|2|3|4
Description
Manages the snapclone group (receives group name and Opcode).
NOTE:
Allow up to 120 seconds for the command to fully take effect.
Opcode: 1—Pause group; 2—Resume group; 3—Abort group; 4—Delete group
ManageSnapcloneTask command
Syntax
ManageSnapcloneTask -task TaskName 1|2|3|5 1|2|3
(Opcode) (priority)
Description
Manages the snapclone task. Receives the taskname, Opcode, and priority.
NOTE:
Allow up to 120 seconds for the command to fully take effect. Priority must appear only for Opcode=5
(Set priority).
Opcode: 1—Pause group; 2—Resume group; 3—Abort group; 5—Set priority of task
Priorities: 1—High; 2—Medium; 3—Low
HP StorageWorks SAN Virtualization Services Platform Manager command line interface user
guide 43