HP Envy 15t-1100se CTO Beats Limited Edition Notebook PC - Manual (Page 95)

Using Setup Utility
Changing the language of Setup Utility
The following procedure explains how to change the language of Setup Utility. If Setup Utility is not
already running, begin at step 1. If Setup Utility is already running, begin at step 2.
1. Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press
f10 .
– or –
Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press
esc . When the
Startup Menu is displayed, press f10 .
2. Use the arrow keys to select System Configuration > Language, and then press enter .
3. Use the arrow keys to select a language, and then press enter .
4. When a confirmation prompt with your language selected is displayed, press enter .
5. To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press
enter .
Your change goes into effect immediately.
Navigating and selecting in Setup Utility
Because Setup Utility is not Windows based, it does not support the TouchPad. Navigation and selection
are by keystroke.
● To choose a menu or a menu item, use the arrow keys.
● To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the
arrow keys or
f5 or f6 .
● To select an item, press enter .
● To close a text box or return to the menu display, press esc .
● To display additional navigation and selection information while Setup Utility is open, press f1 .
Using Setup Utility 85