HP Pavilion t338d Desktop PC - Manual (Page 146)

138 user’s guide
removing a memory module
1 Turn off the computer and all peripherals.
2 Disconnect the modem/telephone cable.
3 Disconnect the power cord and all other attached cables (such as the
keyboard, mouse, and monitor).
4 Remove the side panel and the fan duct (see “removing the side panel” on
page 131 and “removing the fan duct” on page 132).
5 Locate the memory sockets on the motherboard.
6 Move any cabling out of the way, if necessary.
7 Push down the two retaining clips on the ends of the socket until the memory
module pops out of the socket.
DIMM and
DDR DIMM
WARNING: Do not pull the memory module out of the socket. Use
the retaining clips to eject the module.
8 Holding the memory module by its edges only, lift it away from the socket.
Store it in its antistatic packaging.
To install a new memory module in this socket, see “installing a memory
module” on page 136.