HP VMA-series Memory Arrays - Manual (Page 203)

AM456-9026A HP VMA SAN Gateway User’s Guide 203
When job <id> failure-continue is specified, a job will execute all the commands in the
job regardless of any single command failure or error. Otherwise, the first command to fail will
cause the job to cease executing commands.
Display All Jobs
show jobs
List all jobs that currently exist in the system.
show jobs <job_id>
Lists the following information about the specified job:
Any command results are also displayed. If an error string exists for the job, it is displayed.
Container and Target Commands
This section provides the syntax for container and target commands, along with an explanation of
the functionality of each command.
Show All Containers
show containers
The show containers command displays all containers created within a HP VMA-Series
Memory Array enabled for block storage.
Show All Targets
show targets [node <cluster node id>] [hostname <hostname>] [protocol FC]
[id <target id>] [sessions] [detail]
The show targets command displays all Fibre Channel targets. Use the hostname , protocol ,
and id parameters to filter the targets returned.
Job <job_id>
Status <pending|inactive|completed>
Name <friendly_name>
Comment <comment>
Absolute range
Commands <seq. #1>.<seq. #2>. ...