HP Deskjet 720c Printer - Manual (Page 43)

32
2 Put the transparencies in your printer with the rough side down and
the adhesive strip forward. (You can peel off the adhesive strip after
printing.)
3 Slide in the green paper adjusters, just as you would for plain paper.
Push the IN drawer back in and flip the OUT tray down.
4 Print the transparency.
5 Be patient.
Because the printer uses more ink, lays the colors down more slowly,
and allows for a longer drying time between sheets, transparencies
take a while to print.
■ Change the paper type in the HP print settings box back to Plain Paper
or to whatever is appropriate for what you’ll be printing next.
■ Remove any remaining transparencies from the IN drawer and replace
them with plain paper or whatever you’ll be using next.
Adhesive strip forward, tape
side up
Rough side down
A FTER P RINTING
What If
T HE INK NEVER
DRIES OR THERE
ARE CRACKS IN
THE SOLID BLOCKS
OF COLOR
• You might have
printed on the wrong
side of the transpar-
ency. Make sure to
put it into the printer
rough side down.
• You might be trying
to print on a trans-
parency that wasn’t
meant for an inkjet
printer.
T HE QUALITY
ISN ’ T WHAT YOU
WERE EXPECTING
You might not have
chosen the right paper
type and print quality.
Follow the steps in the
procedure above, and
try printing again.
Handy Hints
P ROTECT YOUR
TRANSPARENCIES
If you want to make
notes on your trans-
parency as you talk,
print the transparency
as a flipped document
(described on
page 18).