HP Command View for Tape Libraries Software User Manual
Page 163
1.
You must log into Command View TL as a security user to change the key manager. See
“Starting Command View TL” (page 21)
.
2.
In the Launcher window, click the Devices tab. A list of your current libraries appears.
3.
Double-click the library for which you want to change the key manager.
4.
Click the Configuration tab.
5.
In the left panel, select Key Management.
NOTE:
The Key Management command will only appear if you have Advanced Secure
Manager (see
) and LTO4 and later tape drives installed in your
library (in the Library window, click the Status tab, then in the left panel, click Advanced LTO
Drives).
6.
Select Actions
→Un-enroll Key Manager. The welcome screen appears.
Encrypting data with the HP StorageWorks Secure Key Manager (SKM) or HP Enterprise Secure Key Manager (ESKM) 163