HP Command View for Tape Libraries Software - Manual (Page 102)

Hovering over a bar shows a tool tip of the drive serial number, date, and percentage of the tape
full.
Beneath the graph, a table displays the serial number of the drive where the tape was used, the
date/time, and the percentage full.
Tape Unloads tab
The Tape Unloads tab provides a bar graph showing how many times the tape is loaded and
unloaded. The X-axis is the date on which the tape was unloaded, and the Y-axis is the percentage
full from 0 to 100 in increments of 20.
102 Command View TL GUI