HP Command View for Tape Libraries Software - Manual (Page 140)

12. Click Next to display the Firmware Update Progress window. This window displays the progress
of the firmware update. Click Hide Details to hide the progress by component. When complete,
a dialog box displays the status of the update.
If there are any errors during the firmware update, the update will stop and leave your
configuration settings intact. Contact Support for assistance.
13. Click OK to close the Update Complete dialog box.
14. Click Finish to exit the wizard.
Updating the firmware from version I1xx to version I2xx
Because the format of the firmware file has changed, you must use different procedures to update
the Interface Manager card firmware depending on whether you are changing minor revisions
(I1xx to I1xx or I2xx to I2xx) or major revisions (I1xx to I2xx). You must update a major revision
with the Command View TL GUI (see
Updating the firmware with the Firmware Update
wizard (page 137) ). You can update a minor revision with the Command View TL GUI (see Updating
the firmware with the Firmware Update wizard (page 137) ) or with the CLI (see Updating the
firmware with the CLI (page 186) ).
IMPORTANT: Only versions I182 or higher can upgrade to version I200.
IMPORTANT: The Interface Manager firmware version I200 and above is not available for the
ESL9000 Series library. The ESL9000 Series library must remain at the latest I182 version.
IMPORTANT: After upgrading to version I200, you will not be able to view support tickets that
you generated with version I1xx.
When you update the firmware from version I1xx to version I2xx, the Firmware Update wizard
migrates your configuration settings including:
•
Support information
•
Library settings
•
Interface Manager settings
•
Network settings
•
SNMP settings
•
License information
•
Partitions
•
Secure Manager
In the first step, the Firmware Update Wizard copies the configuration settings to a database file.
In the second step, the Firmware Update Wizard copies the database file to the I200 Interface
Manager card. Depending on the complexity of your configuration, the firmware update may take
up to 1 hour.
140 Command View TL GUI