Key manager – HP Command View for Tape Libraries Software User Manual
Page 158
2.
Activate the newly licensed capacity as follows:
a.
In the Library window, click the Configuration tab.
b.
In the left panel, select Licensed Capacity. A list of the available capacity upgrades appears
in the right panel.
NOTE:
The Licensed Capacity item in the left panel is only visible with libraries that
support the Licensed Capacity feature.
c.
In the right panel, select a capacity upgrade that lists Pending in the State column, and
then select Actions
→Enable Pending Capacity.
The State column is updated and the newly-licensed capacity is now available.
Encrypting data with the HP StorageWorks Secure Key Manager (SKM)
or HP Enterprise Secure Key Manager (ESKM)
To encrypt data, you must have the following items:
•
Advanced Secure Manager (license required)
•
LTO4 and later tape drive
•
LTO4 or later tape cartridge
•
An HP StorageWorks Secure Key Manager (SKM) or an HP Enterprise Secure Key Manager
(ESKM) appliance installed on your network. See the appropriate installation guide to install
the SKM or ESKM.
If encryption is enabled for an LTO4 and later tape drive and a write request occurs, the ETLA tape
library retrieves metadata from the drive and cartridge. This metadata includes the cartridge type,
158
Advanced features in the GUI