HP Command View for Tape Libraries Software - Manual (Page 208)

set interface hostport connection
Description Sets the connection type for one or more interfaces. The connections are either
fabric or direct connect.
CAUTION: Using this command forces a reboot of all interfaces. Ensure that
no backup jobs are in progress before running this command.
Syntax set interface hostport connection [fabric] | [direct]
Availability All users and automatic mode only
Operands Specify the connection type as fabric or direct.
This operand is required. [fabric] | [direct]
Examples To set the connection type of all interfaces to fabric:
/>set interface hostport connection fabric
Committing configuration...done
The interface(s) must be rebooted for this command to take effect.
See also show interface hostport connection
set interface hostport mode
Description Sets the port mode for one or more interfaces. If the interface port mode is set
to hard addressing, the interface is given a default ALPA of 0xef (31 decimal).
Use the set interface hostport alpa command to change the ALPA
for that interface.
Syntax set interface hostport mode [interface_num] | [all]
[port_num] | [all] [hard] | [soft] | [nport]
Availability All users and manual mode only
Operands Specify the number of the interface. The
mode may be changed for all interface_num
interfaces by specifying all for this
operand. This operand is required.
port_num Specify the number of the port. The
mode may be changed for all ports by
specifying all for this operand. This
operand is required.
[hard] | [soft] | [nport] Specify the port mode for the
interface(s). This operand may be either
hard
for hard addressing, soft for
soft addressing, or nport for fabric
addressing. This operand is required.
Examples To set the port mode of ports on all interfaces to soft addressing:
/>set interface hostport mode all all soft
Committing configuration...done
The interface(s) must be rebooted for this command to take effect.
See also show interface hostport mode
show interface hostport alpa
set interface hostport alpa
set interface hostport speed
Description Sets the port speed for one or more interfaces. The available port speeds are
1, 2, or 4 Gbps. Only the HP StorageWorks e2400-4Gb FC interface controller
208 CLI Command Reference