HP Command View for Tape Libraries Software - Manual (Page 220)

Examples To set the system contact name to myfirstname_mylastname:
/>set system contact name myfirstname_mylastname
Committing configuration...done
See also show system contact name
show system contact email
set system contact pager
Description Sets the system contact pager number.
Syntax set system contact pager number
Availability All users and modes
Operands Specify the system contact pager number. The system contact pager
number can include alphanumeric characters, dashes, periods, or
the ‘_’ character. This operand is required. number
Examples To set the system contact pager number to 444-444-4444:
/>set system contact pager 444-444-4444
Committing configuration...done
See also show system contact phone
show system contact email
set system contact phone
Description Sets the system contact phone number.
Syntax set system contact phone number
Availability All users and modes
Operands Specify the system contact phone number. The system contact
phone number can include alphanumeric characters, dashes,
periods, or the ‘_’ character. This operand is required. number
Examples To set the system contact phone number to 444-444-4444:
/>set system contact phone 444-444-4444
Committing configuration...done
See also show system contact phone
show system contact pager
set system name
Description Sets the system name.
Syntax set system name system_name
Availability All users and modes
Operands Specify the name of the tape library. The tape library name
can contain letters, numbers, and '_' characters. The system_name
maximum length for a tape library name is 19 characters
This operand is required.
Examples To set the system name to my_system:
/>set system name my_system
Committing configuration...done
See also show system name
220 CLI Command Reference