Rdc configuration, Verifying connectivity, Rdc configuration verifying connectivity – HP Command View for Tape Libraries Software User Manual
Page 37
5.
Make the changes as required, and then click OK.
RDC Configuration
The RDC Configuration panel of the Administration page allows you to configure the collection
time period for SMI-S. The default time period is seven days. To change the time period:
1.
In the navigation panel select Administration.
2.
Under RDC Configuration, click Configure Days. This opens a separate window.
3.
Enter a number. The maximum number of days is 999999999.
4.
Click OK. The screen refreshes to display the new time period.
Verifying connectivity
The Connectivity Check feature performs a quick check to verify that the management station can
communicate with the selected library.
NOTE:
The Connectivity Check feature is available for ESL E-Series, EML, ESL G3, and MSL6480
libraries only.
To use the Connectivity Check feature:
1.
In the Launcher window, select a library, and then select Actions
→Connectivity Check. The
Please wait dialog box appears.
The Connectivity Check feature performs the test and displays the results. If a problem was
encountered, the dialog box provides information to help you troubleshoot and resolve the
problem.
2.
When you are finished, click OK to close the dialog box. If a problem was encountered,
perform the troubleshooting steps as indicated, and then run the Connectivity Check feature
again.
RDC Configuration
37