Moves per library, Launching moves chart – HP Command View for Tape Libraries Software User Manual
Page 56
NOTE:
Data filtered in the tabular view will also filter data in the graphic view.
Select Sample Time — Select a sample time from the list provided or select a custom range by
entering the start and end dates; see
“Choosing a sample time” (page 66)
.
NOTE:
Library TapeAssure features are supported for the MSL G3, ESL G3, and MSL 6480
libraries only.
Moves per library
The moves per library data chart is displayed under the Libraries link in the TapeAssure tab. The
Library Moves information is displayed in both a tabular and graphical view. The data is shown
as a line chart for a particular tape library over a particular time period.
The Moves graph shows the number of moves (tapes moved from slot to drive or vice versa and
slot to slot) performed per library.
Launching moves chart
To launch the moves chart:
1.
From the navigation tree, select TapeAssure
→Libraries→Moves.
The Media Moves dialog box is displayed.
56
Command View TL GUI