HP Virtual Connect Enterprise Manager Software - Manual (Page 51)

Table 19 Parameter descriptions for -add iscsi-connection (continued)
Optional Required Description Parameter
x Specifies the requested
operational speed for the -speedtype
server port. Valid values
include auto, preferred,
and custom. Default value
is preferred. The speed
types are:
•
auto —Allocates the
maximum port speed,
constrained by the
maximum configured
speed for the network.
•
preferred —Enables
the speed of the network
to match the preferred
speed of the network to
which the connection is
associated.
NOTE: If no preferred
speed is configured, the
network speed defaults to
auto
.
•
custom —Configures
any speed from 100 Mb
to the maximum
configured speed for the
network in 100 Mb
increments.
•
disabled — The server
port is disabled.
x
NOTE: The parameter
-speed is required if
-speedtype is set to
custom .
Specifies the user-defined
speed for a server port.
Valid values include 100
Mb to the maximum
configured speed for the
network in 100 Mb -speed
increments. The acceptable
value is 100 Mb to the
maximum.
Output
The function returns the result of the add operation or a jobid if –nb is specified.
Examples
•
Add a new iSCSI connection to the profile:
vcemcli -add iscsi-connection –profilename MyNewProfile –Network
SomeNetwork
•
Add a new iSCSI connection and leave it unassigned:
vcemcli -add iscsi-connection –profilename MyNewProfile
add iscsi-connection 51