Enabling/disabling local key cache – HP Secure Encryption User Manual
Page 46
Operations 46
5.
A prompt appears, asking you to confirm the change. Click Yes to proceed.
Enabling/disabling local key cache
1.
Open HP Encryption Manager ("
" on page
2.
Log in to Encryption Manager ("
Logging into Encryption Manager
" on page
).
3.
Under Settings, locate Local Key Cache Enabled. Click Set/Change Local Key Cache.
4.
Do one of the following:
a.
To disable, select No.
b.
To enable, select Yes. If you select Yes, two new fields appear.
5.
Complete the following fields.
IMPORTANT:
HP recommends using the default settings, which will disable checking for the
presence of the HP ESKM 3.1 prior to booting. Only change these values if there is a concern that
an unintended individual might remove the server from the environment. After repeated failures to
locate the HP ESKM 3.1, the local key cache is deleted prior to boot. All volumes remain locked
until the HP ESKM 3.1 is reached and retrieves the required keys.
a.
Number of Access Attempts Before Deleting Local Key Cache