HP StorageWorks 2.12 Edge Switch - Manual (Page 137)

Configuring the Switch
137 Edge Switch Element Manager User Guide
■ Click Sync Now to synchronize the switch and HAFM appliance
immediately. The Date and Time Synced dialog box displays.
— Click OK.
— In the Configure Date and Time dialog box, click Activate to enable
synchronization and close the Configure Date and Time dialog box.
Configuring Threshold Alerts
A threshold alert notifies users when the transmit (Tx) or receive (Rx) throughput
reaches specified values for specific switch ports or port types, (E_Ports, F_Ports,
or FL_Ports).
You are notified of a threshold alert by:
■ An attention indicator (yellow triangle) that displays on the port in the
Hardware View.
■ An attention indicator (yellow triangle) that displays in the Alert column of
the Port List View.
■ An attention indicator (yellow triangle) that displays by the Threshold Alerts
field in the Port Properties dialog box.
■ Detailed threshold alert data recorded in the Threshold Alert Log.
Threshold Alert Configuration Parameters
Use the Threshold Alerts option on the Configure menu to configure the
following:
■ Name for the alert.
■ Type of threshold for the alert (Rx, Tx, or either).
■ Active or inactive state of the alert.