Displaying node properties, Figure 21: node properties dialog box, 21 node properties dialog box – HP StorageWorks 2.12 Edge Switch User Manual

Page 82: X. see

Advertising
background image

Monitoring and Managing the Switch

82

Edge Switch Element Manager User Guide

Displaying Node Properties

Open the Node Properties dialog box by double-clicking a row in the Node List
View or right-clicking a row and clicking Node Properties.

Figure 21: Node Properties dialog box

The Node Properties dialog box contains the following options:

■

Port Number—The physical port number on the switch to which the node is
connected.

■

Node Type—The type of port, as supplied by the attached port.

■

Fibre Channel Address—The 3-byte address of the node or the ALPA for
private loop devices.

■

Port WWN—Port WWN of the attached device.

■

Port Nickname—Nickname for the port WWN. Must be configured to
display.

■

Node WWN—Node WWN of the attached device. Must be configured to
display.

■

Node Nickname—Nickname for the node WWN.

■

Unit Type—Type of device. For a list of options, see “

Unit Type—The

following information, if supported, is supplied by the attached device:

” on

page 80, under “

Node List View Parameters

” on page 79.

■

Node Port Number—Physical port number on the attached node (if supplied
by the device).

Advertising
This manual is related to the following products: