HP System Management Homepage-Software - Manual (Page 11)

•
ESX 3.0.2
•
ESX 3.5
•
ESX 4.0
•
Novell Open Enterprise Server (OES)
•
XEN
HP Integrity servers
•
Windows Server 2008 for Itanium-based systems, 64-bit
•
Windows Server 2008 R2 for Itanium-based systems, 64-bit
•
Red Hat Enterprise Linux 5.0 Update 1
•
Red Hat Enterprise Linux 4.0 Update 6
•
SUSE Linux Enterprise Server (SLES) 10 Service Pack 1
•
SUSE Linux Enterprise Server (SLES) 9 Service Pack 4
HP-UX
•
HP-UX 11i v3 (B.11.31) for HP Integrity Servers and HP 9000 Servers
•
HP-UX 11i v2 (B.11.23) for HP Integrity Servers and HP 9000 Servers
•
HP-UX 11i v1 (B.11.11) for HP Servers and Workstations
NOTE: For Linux operating systems, Lightweight Directory Access Protocol (LDAP) is supported on SUSE
Linux Enterprise Server 9 and SUSE Linux Enterprise Server 10.
For Windows operating systems, SmartStart CD requires that all systems have a minimum of 256 MB of
RAM.
HP-UX 11i v1 (B.11.11) Operating Environments are for PA-RISC systems only. HP-UX 11i v2 (B.11.23)
Operating Environments (September 2004 and later). HP-UX 11i v3 (B.11.31) Operating Environments
(February 2007 and later) support both PA-RISC and Itanium-based operating systems.
NOTE: To install the HP SMH application, a minimum of 100 MB free disk space is required.
Supported browsers
For HP-UX Itanium-based or PA-RISC operating systems:
•
Internet Explorer 6.0 SP2
•
Internet Explorer 7.0 (SMH 2.2.9 or later)
•
Internet Explorer 8.0 (HP SMH 3.0.2 or later)
•
Mozilla 1.6, 1.7
•
Firefox 1.0.2, 1.5, 2.0
For Windows Itanium-based or x86 operating systems:
•
Internet Explorer 6.0 SP2
•
Internet Explorer 7.0 (SMH 2.1.9 or later)
•
Internet Explorer 8.0 (HP SMH 6.0 or later)
•
Mozilla 1.7.13
•
Firefox 2.0.0.x
•
Firefox 3.0
•
Firefox 3.5
•
Mozilla Firefox 1.5.0.x
For Linux Intel Itanium or x86 operating systems:
Supported browsers 11