HP NonStop G-Series - Manual (Page 49)

Cartridge Information
SL500 (M852x) Tape Library Installation and User’s Guide — 541531-002
4 -5
Valid Labels
Perform these steps before applying the label into the recessed area on the cartridge:
1. Make sure the cartridge has been at room temperature for at least 24 hours.
2. Clean the surface where the labels will be placed using a cleaning solution made
for this purpose.
3. Locate the type of label that you require.
4. Hold the cartridge so that the write-protect switch is toward you.
5. Attach the label to the cartridge as shown in Figure 4-3 .
Figure 4-3. Ultrium Cartridge Label
1. Volume number label