HP NonStop G-Series - Manual (Page 15)

Installing and Configuring the Tape Drive for the
NonStop S-Series Server
5243 Tape Drive Installation and User’s Guide — 542758-003
2 -3
Installation
10. Connect the other end of the power cord to a nearby AC power outlet.
11. Power on the tape drive by pressing the power switch on the front of the unit. For
the location, see Figure 2-1 on page 2-1.
Note. The tape drive does not have protection against lightning surges. Customers in high-risk
areas should use external surge protection rated for use in their location and be able to handle
the power demand of the tape drive.