HP ProLiant ML310 G5p Server - Manual (Page 46)

Hardware options installation 46
4. Install the TPM board. Press down on the connector to seat the board (" System board components " on
page 11 ).
5. Install the TPM security rivet by pressing the rivet firmly into the system board.
6. Install the access panel (on page 18 ).
7. Lock the bezel.
8. Power up the server (on page 16 ).
Retaining the recovery key/password
The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after
BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery
key/password is required to enter Recovery Mode after BitLocker™ detects a possible compromise of system
integrity.
To help ensure maximum security, observe the following guidelines when retaining the recovery
key/password:
• Always store the recovery key/password in multiple locations.