HP Virtual Connect Enterprise Manager Software - Manual (Page 23)

1. Select the VC Domains that are targeted for firmware updates.
NOTE: Using the firmware update workflow requires VCSU 1.8.0 or later and the VC
Domains being updated must be running VC 3.50 or later. Otherwise, enable maintenance
mode on the VC Domain in preparation for updating the VC firmware with VCSU.
Figure 7 VC Domain tab page
2. Select VC Domain Firmware Update... and all the VC Domains selected are displayed.
3. Select Enable Firmware Update... ( Figure 8 ).
NOTE: VC Domain Firmware update will stay enabled until all VC Domains selected display
the Firmware update status.
Figure 8 Enabling firmware updates
A message similar to the following is displayed:
Updating VC firmware 23