HP L1940T 19-inch LCD Monitor - Manual (Page 48)

Technical Specifications
L1940T Specifications
Maximum Graphics Resolution 1280 x 1024 (75 Hz) analog and digital modes
Text Mode 720 x 400
Dot Pitch 0.264 x 0.264 mm
Horizontal Frequency
(analog mode) 30 to 83 kHz
Vertical Refresh Rate
(analog mode) 56 to 76 Hz
Environmental Requirements
Temperature:
Operating Temperature
Non-operating Temperature
41to 95° F
-4 to 140° F 5 to 35° C
-20 to +60° C
Relative Humidity 20 to 80%
Power Source 100 - 240 VAC, 60-50 Hz
Power Consumption <70 watts typical
Input Terminals 15-pin D-type connector with cable included.
DVI-D connector with DVI-D cable not included
(available on select models)
Recognizing Preset Display Resolutions
The display resolutions listed below are the most commonly used
modes and are set as factory defaults. This monitor automatically
recognizes these preset modes and they will appear properly sized
and centered on the screen.
B–2 User Guide