HP Officejet Pro K850dn Printer - Manual (Page 45)

Tool Task
section click the appropriate cleaning level in the drop-
down list.
Control panel Perform printer maintenance tasks
●
Align printheads: Hold down (Power button), and
then press (Resume button) two times.
● Clean printheads: See To clean printheads automatically .
For more information, see Printer lights reference .
HP Web Jetadmin softwarealerts Supplies security information and set up alerts and
notifications. See
HP Web Jetadmin software .
myPrintMileage Supplies set up alerts and notifications. See myPrintMileage .
Configure network options
This section contains information about configuring the printer's network settings.
For information about opening and using specific management tools, see Overview of printer
management tools . For a list of current settings, print a configuration page. See Understanding and
printing the configuration page .
By factory default, all supported network protocols are turned on. However, turning off unused
protocols can provide such benefits as decreasing network traffic that the printer generates and
preventing unauthorized users from printing to the printer.
Tool Task
Embedded Web server (EWS) Configure network parameters
▲ Set a static IP address: Click the Networking tab, select
Manual IP from the IP Address Configuration option,
enter the static IP address in the Manual IP Address
box, enter the Manual Subnet Mask and Manual Default
Gateway, if needed, and then click Apply.
NOTE It is not recommended that you assign
a static IP address to the printer. However, a
static IP address might resolve certain setup
and printing problems, such as a conflict with a
personal firewall.
HP Web Jetadmin software Supplies information about configuring network parameters.
See
HP Web Jetadmin software .
ENWW Managing the printer 37