HP Integrity NonStop J-Series User Manual
Page 27
a.
Enter Car in the Project name: field.
b.
Deselect the Use default location check box and enter: C:\Examples\
MultiProjectCarApp\Car
c.
Select Empty Project in the NonStop Executable folder.
d.
Under Toolchains:, select C-C++ TNS-E Tools.
3.
Select Next > to open the Initial Build Settings dialog.
4.
In the Initial Build Settings dialog, do not change the defaults. To prepend the corresponding
bin
to PATH before builds, specify either a Cygwin or Msys bin using the Cygwin/Msys bin:
combo box.
5.
Select Next >. To deploy Car to a NonStop system, select a remote system and user and
specify a remote location.
6.
Select Finish.
Change the properties of the Car project to reference the CarParts project so CarParts builds
before the Car project. To set a reference to CarProjects in the Car projects properties:
1.
Select the Car project in the NonStop Project Explorer view.
2.
Select Properties from the NonStop Project Explorer view context menu.
3.
In the Properties for Car dialog, select Project References in the list of property pages on the
left.
4.
In the Project References page on the right (and shown above), select the checkbox for
CarParts
.
5.
Select OK.
Point the Car project to include files in the CarParts project. Link Car in the build artifact (linkfile)
created by CarParts. From the NonStop Development perspective:
1.
Select the Car project in the NonStop Project Explorer view.
2.
Select Properties from the NonStop Project Explorer view context menu.
3.
In the Properties for Car dialog, expand C/C++ Build and select the sub-item Settings.
Creating projects
27