4 deploying hyper-v to proliant servers, Hardware configuration, Hyper-v host deployment – HP OneView for Microsoft System Center User Manual
Page 8: Hardware configuration hyper-v host deployment
4 Deploying Hyper-V to ProLiant servers
Hardware configuration
If any special hardware configuration is needed beyond the defaults, for example a custom RAID
level, use the appropriate tool such as the Option ROM configuration or an STK utility.
Hyper-V host deployment
Deploying a Hyper-V host to a bare-metal ProLiant server follows the standard SCVMM methodology
– create a host/physical computer profile and use the Add Resources: Hyper-V Hosts and Clusters
wizard to discover and deploy.
IMPORTANT:
•
On the Credentials and protocol screen, specify a Run As account that has valid iLO
administrator credentials and set Protocol to Intelligent Platform Management Interface (IPMI).
•
Select a host profile that filters drivers matching a tag instead of PnP IDs. Using PnP IDs may
result in a blue screen.
8
Deploying Hyper-V to ProLiant servers