Recording a video – HP HD-4110 Webcam User Manual
Page 10
6
HP Webcam 4100/4110 User’s Guide
Recording a Video
1
Do either of the following to open ArcSoft WebCam Companion and enter
capture mode:
Press the Video Record
button on your webcam.
Double-click the WebCam Companion 3
icon on the Windows desktop,
and then click Capture
.
2
(Optional) Click Full Screen
to record in full-screen mode.
3
(Optional) Click the resolution list below the icons in the upper-right corner, and select
the resolution setting you want to use for the recording. The default setting is
1280x720 (HD 720p), which provides optimum performance in most environments.
4
Press the Video Record
button or click Record Video
to
begin
recording.
5
Press the Video Record
button again or click Stop Recording
to
stop
recording and save the video to your PC.
6
If you’re recording in full-screen mode, click the X in the upper-right corner to return to
partial-screen mode.
To learn more about using ArcSoft WebCam Companion, click Extras and select
Application Help.
NOTE: Higher resolutions and/or poor lighting may slow down the frame rate and
make the video jerky. For more information on resolution issues, see
“Troubleshooting.”