Sleep timer mode – HP LE2001w 20-inch Widescreen LCD Monitor User Manual

Page 34

Advertising
background image

Sleep Timer Mode

The Sleep Timer mode is an energy-saving feature that enables you to set a time for the monitor to

power on and off at the same time every day. This also extends the life of the backlight bulbs in the

monitor. The Sleep Timer has five settings:

Set Current Time

Set Sleep Time

Set On Time

Timer: On/Off

Sleep Now

To set the timer:

1.

Press the

Menu

button on the monitor front panel to display the OSD Menu.

2.

Scroll down and highlight Management.

3.

Press the

Menu

button to select Management.

4.

Scroll down and highlight and select Sleep Timer > Set Current Time.

NOTE:

You must set the current local time before you reset the time for Sleep Time or On

Time. Note that the time is displayed in a 24–hour clock format. For example, 1:15 p.m. is

displayed as 13 hours 15 minutes.

A power failure or loss of power to the monitor will cause the timer to reset to 00:00. If this

occurs, you will need to reset the sleep timer mode.

5.

Press the

Menu

button once to enter the adjustment mode for hours.

6.

Press the

-

(Minus) or

+

(Plus) button to adjust the hour.

7.

Press the

Menu

button again to enter the time for minutes.

8.

Press the

-

(Minus) or

+

(Plus) button to adjust the minutes.

9.

Press the

Menu

button to lock in the time chosen.

10.

After setting the current time, the highlight automatically skips to Set Sleep Time hours. Repeat

steps 6 through 9 to set Sleep Time.

11.

If you do not want to set Sleep Time, press the

Menu

button twice, then select Save and

Return to exit the menu.

12.

After setting Sleep Time, the highlight automatically skips to Set On Time hours. Repeat steps

6 through 9 to set On Time.

13.

Set the Timer mode to On to activate the Sleep Timer settings.

14.

When you are finished, select Save and Return to exit the menu.

The fifth selection, Sleep Now, turns the monitor backlights off immediately and stays in sleep mode

until the next On Time activates or a monitor button is pressed.

26

Chapter 4 Operating the Monitor

ENWW

Advertising