HP XP P9500 Storage - Manual (Page 94)

Corresponding command Description Operation type
-pool_id <pool ID#> -pool_name <pool
naming>}} {-ldev_id <ldev#> …[-cnt<count>]
| -grp_opt <group option>
-device_grp_name <device group name>
[<device name>]}[-user_threshold
<threshold_1> [<threshold_2>] ]
raidcom add snap_pool {{-pool_id <pool
ID#> [-pool_name <pool naming>] | Extend the capacity of a pool for Snapshot.
-pool_name <pool naming>[-pool_id <pool
ID#>]} | -pool_id <pool ID#> -pool_name
<pool naming>}}{-ldev_id <ldev#>
…[-cnt<count>] | -grp_opt <group option>
-device_grp_name <device group name>
[<device name>]}[-user_threshold <%> ]
raidcom monitor pool -pool {<pool ID#> |
<pool naming>} -operation <type> Start or stop the performance monitor for Smart
Tiers
raidcom reallocate pool -pool {<pool ID#>
| <pool naming>} -operation <type> Start or stop the tier reallocation of a pool for
Smart Tiers.
raidcom add lun -port <port> [<host group
name>] {-ldev_id <ldev#> [-lun_id<lun#>] | Set LU path. LU path
(See the manual: HP P9000
Provisioning for Open Systems
User Guide)
-grp_opt <group option> -device_grp_name
<device group name> [<device name>]}
raidcom delete lun -port <port> [<host group
name>] {-lun_id <lun#> | -ldev_id <ldev#> Delete LU path.
| -grp_opt <group option>
-device_grp_name <device group name>
[<device name>]}
raidcom get lun -port <port> [<host group
name>] Display LU path information.
raidcom discover external_storage -port
<port> Search external storage. External volume
(External Storage)
raidcom discover lun -port <port>
-external_wwn <wwn strings> Search external volume. (See the manual: HP P9000
Provisioning for Open Systems
User Guide)
raidcom add external_grp -path_grp <path
group#> -external_grp_id <gno-sgno> -port Map external volume.
<port> -external_wwn <wwn strings> -lun_id
<lun#> [-emulation <emulation type>]
raidcom disconnect external_grp
{-external_grp_id <gno-sgno> | -ldev_id
<ldev#>} Disconnect the connection for external volume.
raidcom check_ext_storage external_grp
{-external_grp_id <gno-sgno> | -ldev_id
<ldev#>} Check the connection for external volume and
restore it.
raidcom delete external_grp -external_grp_id
<gno-sgno> Unmap external volume.
raidcom get external_grp [-external_grp_id
<gno-sgno>] Display mapped external volume information.
raidcom add ldev - external_grp_id
<gno-sgno> -ldev_id <ldev#> -capacity Create LDEV in external volume.
<size> [-emulation <emulation
type>][-location <lba>][-mp_blade_id
<mp#>]
94 Provisioning operations with RAID Manager