HP XP P9500 Storage - Manual (Page 104)

Figure 32 Script examples of internal volume (open volume) operation (2/2)
Creating internal volumes (mainframe volume)
To create LDEVs of internal volumes (Mainframe volume) and make the LDEVs available to the host,
perform the following provisioning operations.
Command Description Operation Step
raidcom modify ldev -ldev_id<ldev#>
-ssid<value> Configures the SSID unless it is configured.
Set (register) the SSID by specifying SSID settings
(arbitrarily) 1
undefined LDEV numbers in the area in
which SSIDs are not defined.
raidcom add ldev -parity_grp_id
<gno-sgno> -ldev_id <ldev#> {-capacity Creates LDEVs by specifying parity groups. Creating LDEVs 2
<size> | -offset_capacity <size> | -cylinder
<size>} [-emulation <emulation
type>][-location <lba>][-mp_blade_id
<mp#>]
raidcom initialize ldev -ldev_id <ldev#>
-operation <type> Formats created LDEVs. Formatting LDEVs 3
raidcom modify ldev -ldev_id <ldev#>
-ldev_name <ldev naming> Creates LDEV nicknames. This operation is
optional. Creating LDEV
nicknames
(arbitrarily) 4
raidcom modify ldev -ldev_id <ldev#>
-mp_blade_id <mp#> Configures MP blades of created LDEVs. Configuring MP
blades of LDEVs 5
raidcom get ldev -ldev_id <ldev#> … [-cnt
<count>] [-key <keyword>] Displays an information of created LDEV,
and confirms an execution result of the
command. Displaying a LDEV
information 6
104 Provisioning operations with RAID Manager